パンプス,発電 機,灯台,油圧ステーション-TENGDAO
Vacuum strong self-priming pump
1、流量範囲: 80-3000m ³/h
2、Head range: 7-80m
3、自吸式高さ：8.5m
4、Engine options: カミンズ, ユチャイ, ドゥーツ, パーキンス, 濰柴, Quanchai
5、Pump group structure: こじ開け取り付け, open trailer, trailer type silent
注意: The entire series is equipped with a vacuum pump system (the pump does not require water injection before use and can directly pump water)
1、流量範囲: 80-3000m ³/h
2、Head range: 7-80m
3、自吸式高さ：8.5m
4、Engine options: カミンズ, ユチャイ, ドゥーツ, パーキンス, 濰柴, Quanchai
5、Pump group structure: こじ開け取り付け, open trailer, trailer type silent
注意: The entire series is equipped with a vacuum pump system (the pump does not require water injection before use and can directly pump water)
1●Product Features
1、Powerful Self-Priming Automatic Control Function: This pump features a high suction lift and rapid self-priming capabilities, allowing it to start without the need for priming water. It is ideal for integration with mobile pump stations on locomotives and serves as an effective water supply and drainage device. Its applications are extensive, including flood relief, drainage, and firefighting scenarios.
2、Enhanced Efficiency: The fast self-priming speed significantly reduces priming time by 60%, effectively increasing operational efficiency by over 50%. It also enhances suction lift by more than 30%, contributing to a longer service life. The pump is designed for durability, stability, practicality, and cost-effectiveness.
3、Double-Suction Self-Priming Vacuum Pump System: The pump utilizes a dual-suction self-priming vacuum pump configuration, featuring a cleverly designed automatic control system. This design is particularly effective in high-flow, large-diameter applications. Due to its double-suction structure, water enters the impeller from both ends simultaneously and exits from the center without any axial thrust. したがいまして, there are no limits on flow and diameter; the standard sizes range from DN100 to DN600, with flow rates from 100 tons to 3000 トン. Custom sizes can be manufactured as needed.
4、Operational Convenience: The pump operates without the need for priming water, can withstand dry running, and does not require a foot valve, distinguishing it fundamentally from other products. With its robust self-priming and automatic control features, it achieves a high suction lift and ultra-fast self-priming startup. 真空ポンプは、真空レベルが最小に低下したときに自動で作動し、最大に上昇したときに停止します, これにより、主ポンプの運転を妨げることなく補助的な支援を提供します.
5、革新的な自己制御型給水装置: 新たに開発された給水機構には、内蔵の機械式フロートバルブおよび監視プローブが組み込まれており, 装置の信頼性が大幅に向上します. タンク内の水位が一定の高さに達すると, フロートバルブは浮力によって自動的に閉じ、, 水が真空ポンプに入るのを防ぎます. この二重の保護により、真空ポンプの部品が水の侵入によって損傷するのを防ぎます. かつ, 外部配管には水蒸気が真空ポンプに入るのを効果的に防ぐための止水弁が設置されています.
2●Product Overview：
The high-efficiency self-priming pump features an energy-saving permanent magnet motor, which is compact, 軽量, and highly efficient. It effectively addresses the shortcomings of earlier multifunctional double-suction self-priming pumps, such as low suction lift, slow priming, and inability to self-prime or dry start without priming water.
3●Operating Conditions
1、The pump system’s working pressure should not exceed 1.6 MPa, meaning that the pump suction inlet pressure plus the pump head must be ≤ 1.6 MPa (If the working pressure exceeds 1.6 MPa, please specify this when placing an order).
2、ポンプは清水または清水と類似した物理的および化学的特性を持つその他の液体を輸送するために設計されています。 (輸送される媒体に微細な粒子が含まれる場合は、耐摩耗機械シールの取り付けを容易にするため、注文時にそれをお知らせください。, 周囲環境温度は40°Cを超えてはなりません。).
3、高度は超えてはいけません。, 相対湿度は超えてはいけません。 1000 m, ●使用範囲 95%.
4環境温度は最大50°Cまで許容されます。
1、媒体温度は最大80°Cまで達することができます。, 特別な要件により最大200°Cまで許容されます。, 鋳鉄材のpH値は.
2、であり、一方でステンレス鋼はpH範囲が 6 宛先 9, まで対応可能です。 2 宛先 13.
3、TDSY汚水型の場合、, 媒体の密度は超えてはいけません。 1240 kg/メートル³, 同一型式の汚水型では、ポンプ揚程が 10% lower than that of the clean water type.
4、The suction height should not exceed the specified limit of 8.5 宛先 10 メートル, with the suction pipe length being ≤ 30 m.
5、The TDSY sewage type can handle suspended particles with a diameter of approximately 20% of the pump’s diameter and fiber lengths up to five times the pump’s diameter.
