XA 시리즈 디젤 엔진 구동 원심 펌프: 고성능 물 전달 솔루션

Technical parameters of XA end suction centrifugal pump
유량 (Q) 2-1500 m3/시간
머리 (H) 2-152m
Rated speed 1450~2900 rpm (50HZ), 1750~3500 rpm (60HZ)
Rated temperature -10 Celsius to 105 Celsius
Working pressure of 1.2 MPa의, with special requirements up to 1.6 MPa의

문의 보내기 라이브 채팅

제품 세부 정보
매개 변수 테이블
매개 변수 테이블
매개 변수 테이블

Comprehensive Overview of the 3-12 Inch XA Series Diesel Engine Driven Centrifugal Pump

The XA series diesel engine driven centrifugal pump is an exemplary model designed to meet the strict performance and dimensional standards outlined by the European BS EN733 / IN24255 regulations. This innovative pump serves a multitude of applications, including industrial and mining operations, 소방, 건설, 지자체 상수도 및 배수에 사용됩니다., as well as agricultural irrigation. By leveraging a rear-opening structure and elastic coupling, the XA series effectively utilizes direct drive from electric motors or other power sources, ensuring efficient and reliable performance across varied operational conditions.

Design and Structure

The XA series pumps are characterized by a horizontal, 단단식, single-suction, volute structure, which optimizes hydraulic efficiency and minimizes energy consumption. With an extensive range of outlet diameters from 32 mm에서 250 밀리미터, these pumps provide versatility for different installation requirements.

– **Flange Standards**:

– Standard Configuration: DIN2501

– Optional Configuration: ANSI B16.5 Class 150lb

The pump casing is primarily constructed from HT200 cast iron, with alternatives available in QT400-18 ductile iron and 304/316 스테인리스, allowing for customization based on specific operational environments and fluid characteristics.

Impeller and Shaft Specifications

The impeller, a critical component for hydraulic performance, is typically made from H65 brass, with options for HT200 cast iron and 304/316 스테인리스. The shaft is standardly crafted from 2Cr13 stainless steel, 추가 옵션 사용 가능 304/316 스테인리스 스틸 또는 45# 강철, 지속성과 마모 저항 보장.

밀봉 메커니즘

최적의 운전을 위해, 펌프에는 기본적으로 기계식 씰이 장착되어 있으며. 하지만, 사용자는 개별 응용 요구에 따라 패킹 씰을 선택할 수 있습니다. 이러한 밀봉 기술의 유연성은 다양한 유체를 처리하는 펌프의 능력을 향상시키고 누출 위험을 줄입니다.

기술 사양

XA 시리즈 펌프는 다양한 운영 매개변수를 처리하도록 설계되었습니다:

– **유량 (Q)**: 2 – 1500 m³/시간

– **머리 (H)**: 2 – 152 m

– **정격 속도**:

– 1450 – 2900 rpm (50헤르츠)

– 1750 – 3500 rpm (60헤르츠)

– **정격 온도**: -10°C에서 105°C까지

– **작동 압력**: 1.2 MPa의, 특수 구성으로 최대~까지 사용 가능 1.6 MPa의

에너지 효율 및 성능

XA 시리즈의 주목할 만한 특징 중 하나는 에너지 효율 설계로, 공동 현상을 최소화하고 운전 안정성을 극대화합니다. 펌프의 구조와 설계는 높은 성능을 유지하면서도 에너지 소비를 줄일 수 있게 해줍니다. 이는 운영 비용이 중요한 고려 사항인 응용 분야에서 특히 유용합니다.

고급 기능

XA 시리즈 펌프는 내장 24V 배터리 구동 압력계가 장착되어 있어 손쉽게 모니터링하고 운전할 수 있습니다. 펌프는 24V에서 강력한 시동 기능을 제공하며, 보통 닫힘 시동 기능과 함께, 운전 중 안전성과 신뢰성을 향상시킵니다.

이 3-12 Inch XA 시리즈 디젤 엔진 구동 원심 펌프는 펌프 기술에서 중요한 발전을 나타내며, 견고함, 효율성, 그리고 다양한 응용 분야에 대한 적응성을 제공합니다. 유럽 기준 준수, 맞춤형 기능과 결합되어, makes it an ideal choice for industries requiring reliable water transfer solutions. Whether used in municipal systems, agricultural settings, or emergency firefighting scenarios, the XA series stands as a testament to modern engineering excellence in centrifugal pump design.

모델	흐름	흐름	머리	속도	Ax ial power	Electric power	에프	Impeller diameter	（NPSH)r
모델	m3/시간	L/초	m	분 R /	kw	kw	%	밀리미터	m
XA80/32	60	16.67	35.8	1450	10.08	15	58	329	1.5
	100	27.78	33.4		13.18	18.5	69		1.8
	120	33.34	31.3		14.4	18.5	71		2
XA80/32A	57.5	15.96	32.5	1450	8.92	11	57	315	1.5
	95.8	26.6	30.1		11.21	15	70		1.8
	114.9	31.92	28.4		12.56	15	70.7		2
XA80/32B	54.7	15.2	29.7	1450	7.83	11	56.5	300	1.5
	91.2	25.33	27.5		9.75	15	70		1.8
	109.4	30.4	25.6		10.79	15	70.7		2
XA80/32C	52	14.44	26.8	1450	6.77	11	56	285	1.5
	86.6	24.06	24.9		8.38	11	70.1		1.8
	104	28.88	22.8		9.14	11	70.6		2
XA80/32D	49.2	13.68	23.3	1450	5.58	7.5	56		1.5
	82.1	22.8	21.5		6.83	11	70.3	270	1.8
	98.5	27.36	19.7		7.5	11	70.4	270	2
XA80/32E	46.5	12.92	20.4	1450	4.53	5.5	57	255	1.5
	77.5	21.53	18.8		5.63	7.5	70.5		1.8
	93	25.84	17.1		6.15	7.5	70.4		2
XA80/40	60	16.67	56.5	1450	17.92	22	51.5	409	1.8
	100	27.78	52.2		23.11	30	61.5		2
	120	33.34	47.8		25.52	30	61.2		2.3
XA80/40A	58	16.1	52.1	1450	15.81	22	52	395	2.2
	96.6	26.83	47.8		20.44	30	61.5		2.4
	115.9	32.19	44.2		22.82	30	61.1		3.2
XA80/40B	55.8	15.49	48.3	1450	14.37	18.5	51	380	2.2
	92.9	25.81	44.2		18.18	22	61.5		2.4
	111.5	30.97	40.2		20.34	30	60		3
XA80/40C	53.5	14.87	44.2	1450	12.51	15	51.5	365	2.2
	89.2	24.79	40.2		15.93	18.5	61.3		2.3
	107.1	29.75	36.7		17.83	22	60		2.8
XA80/40D	51.3	14.26	40.2	1450	11.02	15	51	350	2.2
	85.6	23.77	36.5		14.08	18.5	60.4		2.3
	102.7	28.53	33.3		15.73	22	59.2		2.8
XA80/40E	49.1	13.65	36.8	1450	9.95	15	49.5	335	2.2
	81.9	22.75	33.5		12.53	15	59.6		2.3
	98.3	27.3	30.4		13.86	18.5	58.7		2.8
XA80/40F	46.9	13.04	33.2	1450	8.84	11	48	320	2.2
	78.2	21.73	30.4		11.11	15	58.3		2.3
	93.9	26.08	27.8		12.4	15	57.3		2.8
XA100/16	75.6	21	8.8	1450	2.7	4	67	176	2
	126	35	7.2		3.05	4	81		2.1
	151.2	42	5.8		3.11	4	76.2		2.7
XA100/16A	70.9	19.69	7.8	1450	2.21	3	68	165	2
	118.1	32.81	6.2		2.51	3	79.5		2.1
	141.8	39.38	5.5		2.7	3	78.5		2.7

모델	흐름	흐름	머리	속도	Ax ial power	Electric power	에프	Impeller diameter	（NPSH)r
모델	m3/시간	L/초	m	분 R /	kw	kw	%	밀리미터	m
XA65/16D	46.6	12.93	24.2	2900	5.03	7.5	61	135	2.7
	77.6	21.55	19.2		5.89	7.5	69		3.5
	93.1	25.86	15.5		6.04	7.5	65		4.1
XA65/16E	43.1	11.97	20.7	2900	4.06	5.5	60	125	2.7
	71.8	19.96	16		4.67	5.5	67		3.5
	86.2	23.95	12.8		4.77	5.5	63		4.1
XA65/20	66	18.33	64.2	2900	19.55	22	59	214	2.4
	110	30.55	56.5		23.08	30	73.3		3.7
	132	36.66	52		25.52	30	73.2		5.2
XA65/20A	63.2	17.56	58.2	2900	16.15	18.5	62	205	2.4
	105.4	29.27	50.5		19.84	30	73		3.7
	126.4	35.12	45.6		21.65	30	72.5		5.2
XA65/20B	60.1	16.7	52.9	2900	14.43	18.5	60	195	2.4
	100.2	27.84	46		17.31	22	72.5		3.7
	120.3	33.41	41.4		18.82	22	72		5.2
A65/20C	57	15.85	47.6	2900	12.32	15	60	185	2.4
	95.1	26.41	41.4		14.88	22	72		3.7
	114.1	31.69	37.3		16.19	22	71.5		5.2
XA65/20	54	14.99	42	2900	10.46	15	59	175	2.4
	89.9	24.98	36.6		12.62	18.5	71		3.7
	107.9	29.98	32.7		13.63	18.5	70.5		5.2
XA65/20E	50.9	14.13	36.8	2900	8.94	11	57	165	2.4
	84.8	23.55	32		10.55	15	70		3.7
	101.8	28.27	28		11.41	15	68		5.2
XA65/26	72	20	98	2900	30.49	37	63	264	2.4
	120	33.33	89.9		39.95	45	73.5		4.2
	144	40	82.3		45.12	55	71.5		5.8
XA65/26A	69.5	19.32	91	2900	27.78	37	62	255	2.4
	115.9	32.19	83		35.87	45	73		4.2
	139.1	38.63	76		40.53	45	71		5.8
XA65/26B	66.8	18.56	84.5	2900	25.19	30	61	245	2.4
	111.4	30.93	77		32.19	37	72.5		4.2
	133.6	37.12	70		35.86	45	71		5.8
XA65/26C	64.1	17.8	78.5	2900	23.21	30	59	235	2.4
	106.8	29.67	71		28.87	37	71.5		4.2
	128.2	35.6	64		31.67	37	70.5		5.8
XA65/26D	61.4	17.04	72.5	2900	20.88	30	58	225	2.4
	102.3	28.41	65		25.63	30	70.6		4.2
	122.7	34.09	59		28.16	37	70		5.8
XA65/26E	58.6	16.29	66.2	2900	18.38	22	57.5	215	2.4
	97.7	27.14	59.4		23.05	30	68.5		4.2
	117.3	32.57	50.8		24.95	30	65		5.8
XA65/26F	55.9	15.53	59	2900	16.32	22	55	205	2.4
	93.2	25.88	52.6		20.37	30	65.5		4.2
	111.8	31.06	48		22.48	30	65		5.8

모델	흐름	흐름	머리	속도	Ax ial power	Electric power	에프	Impeller diameter	（NPSH)r
모델	m3/시간	L/초	m	분 R /	kw	kw	%	밀리미터	m
A125/40	147	40.83	56.6	1450	34.84	45	65	409	1.5
	245	68.05	52.5		47	55	74.5		2.8
	294	81.66	48.7		52.67	75	74		4
XA125/40A	142	39.43	51.9	1450	31.34	37	64	395	1.5
	236.6	65.72	47.6		42	55	73		2.8
	283.9	78.86	43.8		46.69	55	72.5		4
XA125/40B	136.6	37.93	47.7	1450	28.15	37	63	380	1.5
	227.6	63.22	43.1		37.35	45	71.5		2.8
	273.1	75.87	39.7		41.57	45	71		4
XA125/40C	131.2	36.44	43.4	1450	25	30	62	365	1.5
	218.6	60.73	39.8		33.36	37	71		2.8
	262.4	72.88	36.5		37.24	45	70		4
XA125/40D	125.8	34.94	39.9	1450	22.4	30	61	350	1.5
	209.6	58.23	36.6		30.27	37	69		2.8
	251.6	69.88	33.2		33.44	37	68		4
XA125/40E	120.4	33.44	36.8	1450	20.1	30	60	335	1.5
	200.7	55.74	33.5		27.31	30	67		2.8
	240.8	66.89	30.1		29.45	37	67		4
XA125/40F	115	31.95	33.3	1450	17.67	22	59	320	1.5
	191.7	53.24	30.1		23.8	30	66		2.8
	230	63.89	27		26.01	30	65		4
XA125/50	172.8	48	95.1	1450	75.82	90	59	525	2
	288	80	93.8		103.58	132	71		2.6
	345.6	96	91		118.09	160	72.5		3.9
XA125/50A	164.6	45.71	86.7	1450	65.83	75	59	500	2
	274.3	76.19	85.5		90.55	110	70.5		2.6
	329.1	91.43	83.1		102.7	132	72.5		3.9
XA125/50B	156.3	43.43	78.1	1450	56.82	75	58.5	475	2
	260.6	72.38	76.8		77.82	90	70		2.6
	312.7	86.86	74.6		88.19	110	72		3.9
XA125/50C	148.1	41.14	69.9	1450	48.59	55	58	450	2
	246.9	68.57	68.5		66.71	75	69		2.6
	296.2	82.29	66.6		74.59	90	72		3.9
XA125/50D	139.9	38.86	61.9	1450	41.35	55	57	425	2
	233.1	64.76	60.7		56.24	75	68.5		2.6
	279.8	77.71	59		62.85	75	71.5		3.9
XA125/50E	131.7	36.57	54.2	1450	34.08	45	57	400	2
	219.4	60.95	52.8		47.07	55	67		2.6
	263.3	73.14	51.4		51.89	75	71		3.9
XA150/20	216	60	14.1	1450	13.37	18.5	62	214	3
	360	100	12.2		14.95	18.5	80		3.5
	432	120	10.6		16.51	18.5	75.5		4
XA150/20A	206.9	57.48	12.8	1450	11.82	15	61	205	3
	344.9	95.79	10.8		13	15	78		3.5
	413.8	114.95	9.2		14.2	18.5	73		4

모델	흐름	흐름	머리	속도	Ax ial power	Electric power	에프	Impeller diameter	（NPSH)r
모델	m3/시간	L/초	m	분 R /	kw	kw	%	밀리미터	m
XA150/20 B	196.8	54.67	11.5	1450	10.44	15	59	195	3
	328	91.12	9.5		11.24	15	75.5		3.5
	393.6	109.35	7.8		11.94	15	70		4
XA150/20 C	186.7	51.87	10.2	1450	9.1	11	57	185	3
	311.2	86.45	8.2		9.78	15	71		3.5
	373.5	103.74	6.6		10.32	15	65		4
XA150/20	176.6	49.07	8.9	1450	8.07	11	53	175	3
	294.4	81.78	6.9		8.38	11	66		3.5
	353.3	98.13	5.3		8.64	11	59		4
XA150/26	194.4	54	23.1	1450	16.98	22	72	264	1.7
	324	90	21		22.73	30	81.5		2.1
	388.8	108	17.9		25.26	30	75		4
XA150/26 A	187.8	52.16	21.2	1450	15.05	18.5	72	255	1.7
	313	86.93	18.9		20.38	30	79		2.1
	375.5	104.32	15.6		22.15	30	72		4
XA150/26 B	180.4	50.11	19.3	1450	13.35	18.5	71	245	1.7
	300.7	83.52	16.7		17.75	22	77		2.1
	360.8	100.23	13.4		19.36	22	68		4
XA150/26 C	173	48.07	17.6	1450	11.84	15	70	235	1.7
	288.4	80.11	14.7		15.49	18.5	74.5		2.1
	346.1	96.14	11.2		16.49	18.5	64		4
XA150/26	165.7	46.02	15.9	1450	10.7	15	67	225	1.7
	276.1	76.7	12.6		13.15	18.5	72		2.1
	331.4	92.05	9.3		14.22	18.5	59		4
XA150/26 E	158.3	43.98	14.2	1450	9.42	11	65	215	1.7
	263.9	73.3	10.3		11.56	15	64		2.1
	316.6	87.95	7.1		12	15	51		4
XA150/32	222	61.67	36	1450	29.8	37	73	329	2.1
	370	102.78	34		40.53	55	84.5		3
	444	123.34	31.2		45.16	55	83.5		4
XA150/32 A	212.6	59.04	32.7	1450	25.92	30	73	315	2.1
	354.3	98.41	30.3		35.21	45	83		3
	425.1	118.09	27.1		38.72	45	81		4
XA150/32 B	202.4	56.23	29.3	1450	22.43	30	72	300	2.1
	337.4	93.72	26.6		30.16	37	81		3
	404.9	112.46	23.4		32.65	37	79		4
XA150/32 C	192.3	53.42	26.2	1450	19.32	22	71	285	2.1
	320.5	89.03	23		25.4	30	79		3
	384.6	106.84	19.7		27.14	30	76		4
XA150/32	182.2	50.61	23.2	1450	16.44	22	70	270	2.1
	303.7	84.35	19.8		21.26	30	77		3
	364.4	101.22	16.5		22.42	30	73		4
XA150/32 E	172.1	47.8	20.2	1450	13.71	18.5	69	255	2.1
	286.8	79.66	16.6		17.28	22	75		3
	344.1	95.59	13		17.65	22	69		4

모델	흐름	흐름	머리	속도	Ax ial power	Electric power	에프	Impeller diameter	（NPSH)r
모델	m3/시간	L/초	m	분 R /	kw	kw	%	밀리미터	m
A200/50A	395	109.71	80.7	1450	133.49	160	65	500	2
	658.3	182.86	76.6		170.52	200	80.5		3.2
	789.9	219.43	72.8		190.91	250	82		4
XA200/50B	375.2	104.23	72.6	1450	115.87	132	64	475	2
	625.4	173.71	69		146.83	160	80		3.2
	750.4	208.46	65.5		163.18	200	82		4
XA200/50C	355.5	98.74	64.6	1450	100.83	132	62	450	2
	592.5	164.57	62		124.99	160	80		3.2
	710.9	197.49	59		140.97	160	81		4
XA200/50D	335.7	93.26	57.7	1450	85.05	110	62	425	2
	559.5	155.43	55		106.05	132	79		3.2
	671.5	186.51	52		119.56	132	79.5		4
XA200/50E	316	87.77	50.5	1450	72.4	90	60	400	2
	526.6	146.29	48.3		89.93	110	77		3.2
	632	175.54	45.7		99.52	110	79		4
XA250/32	493.1	136.98	31.2	1450	67.55	75	62	329	4.2
	821.9	228.3	27		71.91	90	84		5.2
	986.3	273.96	24		76.71	90	84		5.9
XA250/32A	472.1	131.15	28.4	1450	59.84	75	61	315	4.2
	786.9	218.59	24.5		62.48	75	84		5.2
	944.3	262.3	21		65.83	75	82		5.9
XA250/32B	449.7	124.91	25.3	1450	51.62	75	60	300	4.2
	749.4	208.18	21.1		53.14	75	81		5.2
	899.3	249.81	18		55.78	75	79		5.9
XA250/32C	427.2	118.66	22.1	1450	45.89	55	56	285	4.2
	712	197.77	18		45.6	55	76.5		5.2
	854.4	237.32	15.1		46.83	55	75		5.9
XA250/32D	404.7	112.42	19	1450	39.49	45	53	270	4.2
	674.5	187.36	14.8		39.38	45	69		5.2
	809.4	224.83	12		39.46	45	67		5.9
XA250/32E	382.2	106.17	15.6	1450	31.21	37	52	255	4.2
	637	176.95	11.3		30.62	37	64		5.2
	764.4	212.34	8.8		31.04	37	59		5.9
XA250/40	529	146.94	53.8	1450	103.3	132	75	409	3.5
	881.6	244.9	46.6		127.09	160	88		4.8
	1058	293.88	38.3		136.18	160	81		6.2
XA250/40A	510.9	141.91	50.6	1450	94.46	110	74.5	395	3.5
	851.5	236.52	43.4		115.63	132	87		4.8
	1021.8	283.82	35.6		123.01	132	80.5		6.2
XA250/40B	491.5	136.52	47.5	1450	85.3	110	74.5	380	3.5
	819.1	227.54	41.3		105.85	132	87		4.8
	983	273.04	35		114.21	132	82		6.2
XA250/40C	472.1	131.13	43.5	1450	74.54	90	75	365	3.5
	786.8	218.55	36.9		91.9	110	86		4.8
	944.2	262.26	30.4		97.67	110	80		6.2

모델	흐름	흐름	머리	속도	Ax ial power	Electric power	에프	Impeller diameter	（NPSH)r
모델	m3/시간	L/초	m	분 R /	kw	kw	%	밀리미터	m
A250/40D	452.7	125.74	40	1450	65.72	75	75	350	3.5
	754.5	209.57	33.3		82.4	110	83		4.8
	905.4	251.49	27.2		84.86	110	79		6.2
XA250/40E	433.3	120.35	36.6	1450	58.34	75	74	335	3.5
	722.1	200.59	30		72.36	90	81.5		4.8
	866.6	240.71	23.8		72.91	90	77		6.2
XA250/40F	414	115	33.2	1450	52	75	72	320	3.5
	690	191.6	27		63.3	75	80		4.8
	828	230	21.2		63	75	76		6.2
XA250/50	587.5	163.2	87.5	1450	199.92	250	70	525	2.5
	979.2	272	81.5		260.18	315	83.5		3.7
	1175	326.4	75.5		284.12	315	85		4.7
XA250/50A	559.5	155.43	79.8	1450	176.16	200	69	500	2.5
	932.6	259.05	74.5		227.05	250	83.3		3.7
	1119.1	310.86	69		250.24	315	84		4.7
XA250/50B	531.6	147.66	75	1450	157.29	200	69	475	2.5
	885.9	246.1	67.5		195.66	250	83.2		3.7
	1063.1	295.31	62.7		216.02	250	84		4.7
XA250/50C	503.6	139.89	65	1450	133	160	67	450	2.5
	839.3	233.14	60.5		166.54	200	83		3.7
	1007.2	279.77	56		182.78	200	84		4.7
XA250/50D	475.6	132.11	58	1450	115.53	132	65	425	2.5
	792.7	220.19	53.6		142.79	160	81		3.7
	951.2	264.23	49.3		153.81	160	83		4.7
XA250/50E	447.6	124.34	50.8	1450	119.04	132	52	400	2.5
	746.1	207.24	46.5		119.54	132	79		3.7
	895.3	248.69	42.5		129.47	160	80		4.7
XA300/40	702	195	49.5	1450	137.09	160	69	409	3
	1170	325	40.8		149.37	200	87		3.5
	1404	390	38.7		170.01	200	87		4.1
XA300/40A	678	188.33	46.2	1450	125.39	160	68	395	3
	1130	313.88	40.6		144.38	160	86.5		3.5
	1355.9	376.65	35.5		152.37	160	86		4.1
XA300/40B	652.2	181.17	43.1	1450	115.95	132	66	380	3
	1087	301.96	37.6		131.36	160	84.7		3.5
	1304.4	362.35	32.1		135.38	160	84.2		4.1
XA300/40C	626.5	174.02	39.2	1450	104.46	132	64	365	3
	1044.1	290.04	34		115.05	132	84		3.5
	1253	348.04	29		119.17	132	83		4.1
XA300/40D	600.7	166.87	35.8	1450	95.98	110	61	350	3
	1001.2	278.12	30.8		103.64	132	81		3.5
	1201.5	333.74	26		105.64	132	80.5		4.1
XA300/40E	575	159.72	32.5	1450	89.25	110	57	335	3
	958.3	266.2	27.5		91.97	110	78		3.5
	1150	319.44	22.4		92.27	110	76		4.1